Pitney Bowes ADDRESSRIGHTTM DA900 - Manual (Page 44)

5
Printer Adjustments
5-8 SV60970-OG Rev. A
Before your printer can print your media, you must position
the printheads to match their positions on the template you
have designed.
To position the printheads:
1. Open the cover.
2. Check that the printheads have the correct color car-
tridges. Change if necessary.
3. Loosen the knobs shown below.
4. Using the ruler between printheads 2 through 5 and 1 and
6, slide each printhead to the required position.
5. Tighten each locking knob.
Ruler
Indicates
position
of Knobs
5. Physically
Position the
Printheads