Primera Technology BRAVOPRO XI 032910-511262 - Manual (Page 47)

Creating Discs 43
3. When the print is complete, rotate disc 180º and
put the disc back in the input bin and repeat step
2 using the same disc.
4. When the second run of the print is complete, you should
have a test print that looks similar to the following:
5. Along the Vertical axis of the printed disc, find the number
whose lines touch. For example, in the above illustration,
Enter the number 2 into the Vertical box of the Calibration
window and 0 for the Horizontal axis.
6. Select the OK button. Your images should now be centered
when printed on a disc.
After your selections have been made, close out of the
printer setup window. You are now ready to go to an
application program and print. All printer driver selections
will stay the same until you change them.
-5 -4 -3 -2 -1 0 1 2 3 4 5
5 4 3 2 1 0 -1 -2 -3 4 -5
Horiz ontal Calibration
Find and enter the number
whose lines tough
(must be the SAME n umber)
Ver tical Calibration
Find and enter the number
whose lines tough
(must be the SAME n umber) NOTE:
After printing this image
once, rotate this CD
so the ARROWS point
to the BACK of the printer
and print again. -5
-4
-3
-2
-1
0
1
2
3
4
5
5
4
3
2
1
0
-1
-2
-3
-4
-5
BACK BACK
511262.qxd 10/15/2009 10:37 AM Page 43
TOC INDEX