Primera Technology BRAVOPRO XI 032910-511262 - Manual (Page 12)

8 Getting Started
4. The Recorder Trays then automatically shut. As soon as
each drive tray closes the burn process will begin for that
drive. With two drives, each drive burns independently of
the other. If a disc does not record properly (meaning that
all or part of that disc is not recordable), the Robotic Disc
Transporter picks it out of the Recorder Tray and sends it
to the Reject Area .
5. The Recorders are now writing to the discs. If you were to
fully record a CD with data, audio, video or music (650
MB), recording time is about 3 ½ minutes each. A full DVD
records in about 7-15 minutes depending on the speed of
the media to which you are recording. Most jobs don't fill
the entire disc, so recording time is usually less than this.
After recording, the Recorder Tray opens automatically.
The Robotic Disc Transporter will lift the disc out of the
Recorder Tray. The Printer Tray will open. The Robotic
Disc Transporter will lower the disc into the Printer Tray,
and the Printer Tray will then automatically close.
6. The Robotic Disc Transporter will load the open Recorder
Drives with blank discs from the Input Bin to start record-
ing the next round.
7. Once the second round disc is loaded in the Recorder Tray,
printing will start with the recorded disc from the previous
round. This simultaneous printing and recording greatly
increases the throughput of your Publisher.
511262.qxd 10/15/2009 10:34 AM Page 8
TOC INDEX