Primera Technology BRAVOPRO XI 032910-511262 - Manual (Page 27)

Creating Discs 23
On most job types a volume label can also be created at this
step. This is the label that will appear when this disc is
inserted into a computer drive.
When you have selected the data you would like to burn click
the next button.
Step 2: Add Print
If you want something printed on your disc, this is where you
choose an existing label or create it. Follow these steps.
To Select an exiting label:
1. Click the browse button to open a browse window or drag
and drop files to the print file box or click the drop down
arrow to choose previously used labels.
2. Choose any supported file types of JPG, BMP, TIFF,
SureThing (PC) Disc Cover (Mac). Files should be
4.72"(120mm) square. For best print quality the image
resolution should be at least 300 dpi. Non-conforming files
will be stretched or increased in size to fill the full size of
the disc.
3. Once the print file is selected a preview will be displayed.
4. At this point you may choose to move on to the next step
by clicking the next arrow. However, there are print quality
and print area settings that you may want to adjust.
5. Several preset media types that correspond with the media
available at our webstore can be selected the Media drop
down box. When you select a media type from this box the
Print Quality, Outer Margin and Inner Diameter are auto-
matically adjusted to fit that media.
6. To manually set these settings simply edit them. The media
type will automatically change to Custom. You can save
your adjusted settings by typing the name of the profile and
clicking Save. This name and the associated settings will
now be available to choose in the media drop down box.
Below is a description of each of the available settings.
• Quality. There are several choices here that correspond to
the speed of the print and the saturation of the image.
Higher quality = slower print speed and more vibrant and
crisp prints.
511262.qxd 10/15/2009 10:35 AM Page 23
TOC INDEX