Primera Technology BRAVOPRO XI 032910-511262 - Manual (Page 15)

Hardware and Software Setup 11
e. Once the installation has completed, click Quit.
You have successfully installed all the necessary software!
Section C below will describe how to connect the Publisher to
your Mac.
C. HARDWARE SETUP
Step 1: Applying Power
• Locate the power cord supplied with your Publisher.
• Plug the adapter into a surge protected outlet, and plug the
power plug into the power port on the rear panel of the
Publisher.
Step 2: Loading Media (Discs)
NOTE: Your Publisher can print directly onto virtually any brand of inkjet
printable-surface CD/DVD media. However, different brands of discs
have different printable coatings. Because of this, you may need to
adjust the printer driver settings to accommodate your specific
brand of CD/DVD media. Refer to Section 3E and 3F for further
printer driver information.
Due to the wide variety of printable-surface CD/DVD media,
you may find that certain brands of discs provide higher print
quality than others. For maximum print quality, use CD/DVD
media authorized by Primera.
Refer to the following steps when loading discs in to the
Publisher:
511262.qxd 10/15/2009 10:34 AM Page 11
TOC INDEX