Primera Technology Automated Optical Disc Duplication & Printing System DP-XR User Manual

Quick start

Quick Start

P/N 510931-100605

Connecting the USB 2.0 Cable

Connect the
Publisher to your
computer with
the beige USB
2.0 Cable.

If you are using Windows

If you are using Windows, after a few moments
a found new hardware wizard will appear.

Select "Install the software automatically" and
click Next. Make sure that you have your

installation disc in a drive on your computer.

You may see a notice like the one shown below
stating that the device has not passed Windows
Logo Testing. Click Continue Anyway to

continue installing the printer driver for
your Publisher.

If you are using a MAC

If you are using a MAC you may be required to Add
the printer via the Printer Setup Utility.

1. Open the Printer Setup Utility located in the

Applications - Utilities folder.

2. Click

Add

. Select the Disc Publisher XR from the

list of available printers. Click Add again.

Publishing a Disc

Congratulations, you are now ready to start Publishing discs!

•

For Instructions on copying a disc using a PC refer to section 3 in the User’s Manual.

•

For Instructions on copying a disc using a Macintosh refer to section 4 in the User’s Manual.

•

For help with problems publishing discs using a PC or Macintosh please visit Primera's online
Knowledgebase at www.primera.com/knowledgebase.html

Automated Optical Disc

Duplication & Printing System

AUTOPRINTER

s Warra

isc P

u blishe

r p

*after registering your

product. See

www.primerawarranty.com

for terms and conditions.