beautypg.com

Section 3: creating discs, A. tutorial: copy a disc, Print only for autoprinter users) – Primera Technology BRAVOPRO XI 032910-511262 User Manual

Page 21

background image

Creating Discs

17

Section 3: Creating Discs

There are two main components to creating discs, printing and

burning. For PC, SureThing CD Labler is used to design the

image to print on the disc. For Mac,

Disc Cover

is used to

design the image to print on disc. For Mac and PC,

PTPublisher controls the recording and allows you to select the

image to be printed to your discs.

A. TUTORIAL: COPY A DISC (PRINT ONLY FOR

AUTOPRINTER USERS)
Note: PTPublisher functions virtually the same on both Mac and PC.

Every effort was made to make them look and function the same.

However, due the unique benefits and limitations of both operating

systems there are subtle differences. Where important, those

differences will be highlighted. In general, these instructions will

apply to both the Mac and PC editions.

Note for AutoPrinter Users: Start at step 4 after choosing Print Only

from the project starter window.

There are three basic steps to any project. 1. Add Data 2. Add

a Print File. 3. Set the number of copies and adjust options

(Summary). The instructions below explain how to do the

most common project - A Copy Project.
A Copy Project can be used to copy any CD, DVD, DVD-DL

or Blu-ray master. This job type reads the master disc from the

Disc Publisher drive to the hard drive of your computer.

The master is stored in the Global Image format (*.gi) in a

temporary location on your computer. PTPublisher uses this

temporary file to make all subsequent copies that are

requested. The master disc is read only once to create the

initial temporary file.
Recommended for: All CD, DVD or Blu-ray content or disc

types (Audio CD, Data CD, Software Install Disc, Video CD,

DVD Video, Blu-ray Video: CDR, DVD-R, DVD+R, DVD-ROM,

DVD+DL, DVD-DL, BDR, BDR-DL, etc.). This is best used for

single runs where you will not need to make additional copies

of the master disc a later time.
This project requires a master disc. If you do not have one

use another project type. (See Section 3B)

511262.qxd 10/15/2009 10:35 AM Page 17

TOC

INDEX

This manual is related to the following products: