Help 71 – Panasonic KX-FLB851 User Manual
Page 73
9. Help
71
For assistance, please visit http://www.panasonic.com/consumersupport
“
LOW TEMP.”
L
The inside of the unit is extremely cold and cannot be operated.
Use the unit in a warmer area. While the unit cannot be operated,
the received documents are temporarily stored into the memory,
and will be printed out automatically when the unit warms up.
“
MAINTENANCE
REQUIRED”
“
PRINT INFO
PRESS START”
L
Your unit requires a scheduled maintenance. Maintenance is
highly recommended for optimal performance of your unit. Please
contact us by our Customer Services directory (page 99).
“
MEMORY FULL”
L
When performing memory transmission, the document being
stored exceeded the memory capacity of the unit. Send the entire
document manually.
L
When making a copy, the document being stored exceeded the
memory capacity of the unit. Press {STOP} to clear the message.
Divide the document into sections.
“
MODEM ERROR”
L
There is something wrong with the unit’s modem. Contact our
service personnel.
“
NO FAX REPLY”
L
The other party’s fax machine is busy or has run out of recording
paper. Try again.
“
OUT OF PAPER
INPUT TRAY #1”
L
Recording paper is not installed or the input tray has run out of
paper. Install paper (page 15).
L
Recording paper is not fed into the unit properly. Reinstall paper
(page 15).
Note:
L
“
#1”: Paper input tray
L
“
#2”: Multi-purpose input tray
L
“
#3”: Optional input tray
L
“
#1+#3”: Paper input tray and optional input tray
“
OUT TRAY #1 FULL”
L
Paper has been fully stacked on the output tray. Remove the
stacked paper.
Note:
L
“
#1”: Upper output tray
L
“
#2”: Middle output tray
L
“
#3”: Lower output tray
“
PAPER JAMMED”
“
OPEN LOWER LEFT
SIDE TRAY COVER”
L
A recording paper jam occurred inside of the optional input tray.
Clear the jammed paper (page 84).
“
PAPER JAMMED”
“
OPEN TOP COVER”
L
A recording paper jam occurred inside of the unit. Clear the
jammed paper (page 82).
“
PC FAIL OR BUSY”
L
The cable or the computer power cord is not connected correctly.
Check the connections (page 47).
L
The software is not running on the computer. Restart the software
and try again.
“
PLEASE WAIT”
L
The unit is warming up. Wait for a while.
“
REDIAL TIME OUT”
L
The other party’s fax machine is busy or has run out of recording
paper. Try again.
Display
Cause & Solution
FLB851-PFQX2175YA-en.book Page 71 Thursday, September 8, 2005 2:24 PM