1 erasing all caller information, 2 erasing specific caller information – Panasonic KX-FLB851 User Manual
Page 41

4. Caller ID
39
Display while viewing
L
When the unit could not receive a name, the
display will show “
NO NAME RCVD”.
L
When no calls have been received, the
display will show “
NO CALLER DATA”.
To edit a telephone number before calling
back
Press {*} repeatedly after step 2. Each time
you press {*}, the telephone number will be
changed as follows:
To stop viewing
Press {STOP} after step 2.
4.2.1 Erasing all caller
information
1
Press {MENU} repeatedly to display
“
CALLER SETUP”.
2
Press {SET}.
L
“
CALL LIST ERASE” will be displayed.
3
Press {SET}.
L
To cancel erasing, press {STOP}, then
{
MENU}.
4
Press {SET}.
5
Press {STOP} to exit.
4.2.2 Erasing specific caller
information
1
Press {CALLER ID}.
2
Press {V} or {^} repeatedly to display the
desired item.
3
Press {<}.
L
To cancel erasing, press {STOP}.
4
Press {SET}.
L
To erase other items, repeat steps 2 to 4.
5
Press {STOP} to exit.
4.3 Storing caller
information into the one-
touch dial feature and
navigator directory
L
Keep the front cover page open for button
locations.
Important:
L
This feature is not available in the
following cases.
–
The telephone number includes data
other than numbers (i.e., * or #).
–
The caller information does not
include a telephone number.
1
Press {CALLER ID}.
2
Press {V} or {^} repeatedly to display the
desired item.
3
Press {MENU}.
4
Select the station key or navigator directory.
For stations 1–3:
1. Press the desired station key.
2. Press {SET}.
3. Press {SET}.
For stations 4–9:
1. Press the desired station key.
2. Press {SET}.
For stations 10–18:
1. Press {LOWER}, then press the desired
station key.
2. Press {SET}.
For navigator directory:
1. Press {<} or {>}.
2. Press {SET}.
5
Press {SET}.
Note:
L
You can confirm the stored items by printing
the telephone number list (page 91).
L
The unit can only store a name of up to 16
characters long.
L
To edit a name or number, see page 30.
L
If caller information does not include the
caller’s name, enter the name manually. See
the instructions on page 29.
1 1 - Area code - Local telephone number
(“1” added)
2 Local telephone number only (area code
omitted)
3 Area code - Local telephone number
4 1 - Local telephone number (“1” added
and area code omitted)
FLB851-PFQX2175YA-en.book Page 39 Thursday, September 8, 2005 2:24 PM