Panasonic KX-FLB851 - Manual (Page 66)

8. Programmable Features
64
company. This feature can be set up to 24 hours
in advance of the desired time.
{
0} “ OFF” (default)
{ 1} “ ON”
To send a document:
1. Insert the document into the auto document
feeder.
2. If necessary, change to the desired resolution
(page 26) and the desired contrast (page 26).
3. Press {MENU}.
4. Press {#}, then {4}{1}{2}.
5. Press {1} to select “ ON”.
6. Press {SET}.
7. Enter the fax number.
L To enter an item using one-touch dial
feature and navigator directory, see step 4
on page 31. (When using navigator
directory, you do not have to press
{
DIRECTORY} before pressing {V} or
{^} .)
8. Press {SET}.
9. Enter the transmission start time.
L Press {*} repeatedly to select “ AM” or
“ PM”.
10. Press {SET}.
L The document will be fed into the unit and
scanned into memory. The unit will then
send the data at the specified time.
Note:
L To cancel after programming, press {STOP}
then {SET}.
L You can also send a document using the
scanner glass. Press {SET} in step 10, then
press {START}.
{#}{ 4}{1}{3} Setting the Error Correction
Mode (ECM)
ECM SELECTION
MODE=ON [V^]
This feature is available when the sending /
receiving fax machines are ECM compatible.
{
0} “ OFF”: Deactivates this feature.
{ 1} “ ON” (default): If there is an error during fax
transmission / reception, the unit will support the
communication.
{#}{ 4}{1}{6} Setting the connecting tone
CONNECTING TONE
MODE=ON [V^]
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones:
fax tone, ring back tone and busy tone. You can
use these tones to confirm the status of the other
party’s machine.
{
0} “ OFF”: Deactivates this feature.
{ 1} “ ON” (default): You will hear connecting
tones.
Note:
L If the ring back tone continues, the other
party’s machine may not be a fax machine or
may have run out of paper. Check with the
other party.
L The connecting tone volume cannot be
adjusted.
{#}{ 4}{3}{0} Activating the Distinctive Ring
feature
DISTINCTIVE RING
MODE=OFF [V^]
{ 0} “ OFF” (default)
{ 1} “ ON”
See page 41 for details.
{#}{ 4}{3}{1} Setting the ring pattern for fax
(Distinctive Ring feature)
FAX RING PATTERN
RING=B–D [V^]
{ 1} “ A”
{ 2} “ B”
{ 3} “ C”
{ 4} “ D”
{ 5} “ B-D” (default)
See page 42 for details.
{#}{ 4}{3}{2} Receiving other size
documents
AUTO REDUCTION
MODE=ON [V^]
To receive a fax document that is longer than
your recording paper.
{
0} “ OFF”: The unit will print the original size.
{ 1} “ ON” (default): The unit will fit received
documents onto your recording paper.
{#}{ 4}{3}{4} Changing the fax activation
code
FAX ACTIVATION
MODE=ON [V^]
If you wish to use an extension telephone to
receive faxes, activate this feature and program
the activation code.
{
0} “ OFF”
{ 1} “ ON” (default)
1. Press {MENU}.
2. Press {#}, then {4}{3}{4}.
FLB851-PFQX2175YA-en.book Page 64 Thursday, September 8, 2005 2:24 PM