Hardware installation, Installing the mgc-25 in a rack, Hardware installation -8 – Polycom DOC2232A User Manual
Page 22: Installing the mgc-25 in a rack -8
MGC-25 Getting Started Guide
2-8
Hardware Installation
Installing the MGC-25 in a Rack
There are two methods to install the system in a rack:
•
Install brackets supplied by the rack manufacturer on each side of the
rack on which the MGC-25 is placed. Secure the system by fastening
four screws to the rack on the front panel.
•
Install a shelf supplied by the rack manufacturer. Place the MGC-25 on
top of the shelf. Secure the system by fastening four screws to the rack
on the front panel.
Place the system on brackets that have been installed
according to rack manufacturer specifications
Place the system on a shelf that has been installed
according to rack manufacturer specifications
This manual is related to the following products: