System reset, Manual system reset, System reset -7 – Polycom DOC2232A User Manual
Page 21: Manual system reset -7
Chapter 2 - Hardware Description and Installation
2-7
To save the values and reset the system, use the left/right (
/
) buttons to
select OK, and then press the Select (
) button.
Alternatively, to return to the Main Menu without saving changes, use the
left/right (
/
) buttons to select Cancel, and then press the Select (
)
button.
System Reset
The System Reset function is available from the Main Menu.
To reset the system, use the arrow buttons to select OK, and then press the
Select (
) button.
To cancel, use the arrow buttons to select Cancel, and then press the Select
(
) button.
Manual System Reset
You can reset the system manually at any time by holding down the left (
)
and right (
) buttons simultaneously.
The OK option appears only if a component has been modified.
When the cursor is on the first component of the IP address, you can press the
left arrow button to access the OK and Cancel options.