Psion Teklogix Vehicle-Mount Computer 8515 - Manual (Page 93)

Chapter 5: Configuration
Backlight
Psion Teklogix 8515 Vehicle-Mount Computer User Manual 73
Figure 5.7 Repeat Tab
Enable Character Repeat
Tapping in the checkbox next to this option enables the key behaviour you specify in this
dialog box.
Repeat Delay
The position of the slider determines how long a key must be held down before it begins to
autorepeat.
Repeat Rate
The value assigned for the Repeat Rate parameter determines how quickly the key you
press repeats and is measured in characters per second (cps). Sliding the bar to the left slows
the repeat rate, and sliding the bar to the right increases the repeat rate.
5.6.2 Backlight
• In the Keyboard Properties dialog box, open the Backlight tab.
Note: Use the field at the bottom of this dialog box to test the repeat delay and rate
settings you’ve chosen.