Psion Teklogix Vehicle-Mount Computer 8515 - Manual (Page 40)

Chapter 2: Basic Checkout
SCU Tabs
20 Psion Teklogix 8515 Vehicle-Mount Computer User Manual
When you tap on the config you created, the Summit DC-802.11 SC CF radio module
(Model RA2041) attempts to connect to the network using these steps:
- Associate to the SSID.
- Authenticate to the network.
- If EAP authentication is being used, derive dynamic encryption keys.
- If DHCP is being used by the network, obtain an IP address.
If the Summit DC-802.11 SC CF (Model RA2041) is not connecting:
•
Tap on the Status tab.
The Status dialog box lists the IP and MAC address, and indicates the current state of the
radio, the signal strength, channel etc.
You can also use the Status screen for DHCP renewal and ICMP Echo Requests (Pings).
2.9 SCU Tabs
This section provides a detailed description of each of the tabs available in the SCU—Main,
Config, Status, Diags and Global Settings.
2.9.1 Main Tab
The Main tab is displayed when you tap on Start>Programs>Summit>SCU.
Figure 2.13 SCU Main Menu
• Enable/Disable Radio: Enables or disables the radio. This a toggle button; when the
radio is enabled, this button reads Disable Radio, and when the radio is disabled, it reads
Enable Radio.
Important: For details about the Status dialog box, refer to “Status Tab” on page 28 .