Psion Teklogix Vehicle-Mount Computer 8515 - Manual (Page 134)

Chapter 5: Configuration
Ports Tab
114 Psion Teklogix 8515 Vehicle-Mount Computer User Manual
5.17.4.1 Serial Port (COM 1)
Figure 5.65 Serial Port Settings
Enabled
This parameter must be set to on in order for the 8515 to recognize the device connected to
the serial port.
Power
Double-tapping on this parameter displays a dialog box in which you can choose to disable
(turn off) this port, or you can assign 5V power to the port.
Figure 5.66 Serial Port Power Options
Baud
Double-tapping on this parameter displays a pop-up window in which you can choose an ap-
propriate baud rate.
Figure 5.67 Baud Rate