3 important operating instructions, 4 switching the 8515 on and off, Important operating instructions – Psion Teklogix Vehicle-Mount Computer 8515 User Manual
Page 28: Switching the 8515 on and off
Chapter 2: Basic Checkout
Important Operating Instructions
8
Psion Teklogix 8515 Vehicle-Mount Computer User Manual
2.3
Important Operating Instructions
Backup Battery
The vehicle-mount backup battery provides one hour of memory backup. The capacity is
reduced as the operating temperature cools. The table below provides a general outline of
battery capacity based on the operating temperature. Charging of the backup battery will
occur between 0° C and 40° C.
2.4
Switching The 8515 On And Off
•
To switch on the 8515, press the [ENTER/ON] key.
To switch off the 8515:
•
Press the [BLUE] key, and then press the [ENTER/ON] key.
Turning off the 8515 does not result in a complete reboot; rather, the unit enters a power-
saving, “suspend” state. When the 8515 is turned on from suspend state, operation resumes
within a few seconds.
Warning: IT IS CRITICAL that this information be reviewed and that any guidelines
applicable to your vehicle-mount be strictly followed.
Note:
If the backup battery temperature is less than 10° C and a brown-out occurs,
the display backlight will switch off in order to maintain vehicle-mount opera-
tions. The backlight will switch back on when external power is restored or
the battery temperature is above 10° C.
Table 2.1 Backup Battery Performance
Temperature
Backup Battery Capacity
-20
°
C (-4
°
F)
65%
-10
°
C (14
°
F)
80%
0
°
C (32
°
F)
close to 90%
Warning: Do not install the 8515 in such a way that the power cable is bent 90
degrees as this may damage the power cable and power cable strain relief.
Note:
If the 8515 is in suspend state, pressing [ENTER/ON] ‘wakes’ the unit from
this state. The screen in which you were working before the computer entered
suspend state is displayed.