Pentax Browser 2.0 - Manual (Page 16)

14
6
Press the 4 button on the camera.
1
Turn your PC on.
2
Turn off your camera and use the USB cable to connect
your camera and your PC.
Confirm that an SD Memory Card is inserted into your camera.
3
Turn your camera on.
The camera is recognized as a [Removable Disk] in [My Computer].
• Do not connect the camera to your computer while [PictBridge] is selected for
the [Transfer Mode].
• If the USB transmission speed of the computer is slower than that of the
camera, an error may occur when transferring data. If this occurs, set the
Transfer Mode to [PC-F]. This sets the transfer speed to the USB 1.1 data
transfer rate, thereby reducing the possibility of an error.
Connecting Your Camera to Your PC
• If the [Removable Disk Drive] dialog appears in Windows XP, select [Open
folder to view files using Windows Explorer] and click [OK]. The window in
step 3 on p.15 appears.
• When using Windows XP, if the SD Memory Card has a volume label, the
content of the volume label name appears instead of [Removable Disk]. A
new unformatted SD Memory Card may show the manufacturer name or
model number.