Pentax Browser 2.0 - Manual (Page 15)

13
Saving Images on Your Computer
Here is the procedure for saving images captured with your digital camera
onto your computer.
This section describes the method for saving images by connecting your
camera and computer with the USB cable, as well as other methods.
J is used as an example here. When using w, [Transfer
Mode] does not need to be set. Go to “Connecting Your Camera to Your
PC”.
1
Press the 3 button on the camera.
The [A Rec. Mode] menu or the [Q Playback] menu appears.
2
Press the four-way controller (5) to display the [H Set-up]
menu.
3
Use the four-way controller (23) to select [Transfer Mode].
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller
(23) to select [PC].
Saving Images by Connecting Your Camera
and PC (For Windows)
Set [Transfer Mode] on the Camera to [PC]
NTSC
P C
P C - F
Brightness Level
Set-up
Video Out
Transfer Mode
Auto Power Off
File #
Sensor Cleaning
0
OK OK Cancel
PictBridge