Philips SD AG-HPX171E - Manual (Page 78)

E-78
Connecting external units (continued)
Computer (non-linear editing/file transfer)
When connecting a 139 cable
Attach the provided two ferrite cores (length: 30 mm) to the both ends of
the cable. After passing the cable as shown in the figure on the right, close
the ferrite cores until they click into place and lock.
Always take sufficient care when handling the ferrite core, as it can be easily
damaged when dropped or subjected to other impact.
When connecting a USB cable
Attach the provided two ferrite cores (length: 35 mm) in such a way that the
whole ferrite cores fit within about 5 cm from both ends of the cable. After
threading the cable as shown in the figure on the right, close the ferrite
cores until they click into place and lock.
Always take sufficient care when handling the ferrite core, as it can be easily
damaged when dropped or subjected to other impact.
File transfer/nonlinear editing
USB 2.0
1394
Computer
USB cable (optional)
• For a Windows computer
Mini-B type
139 cable (optional)
• For an Apple Macintosh computer
6-pin
Ferrite core (included)
When connecting a USB cable, first connect the cable to the PC.
When connecting to a device having 4-pin type 1394 connector, first connect the cable to the 6-pin type
1394 connector on the camera.
For details on the computer’s conditions and other factors, see Page 82.
139 AVC transfer/nonlinear editing
1394
Computer (Windows/Apple Macintosh)
6-pin
139 cable (optional)
Ferrite core (included)
When controlling this camera from a non-linear editor, cancel the thumbnail screen on the camera.
(Page 67)
No guarantees are given for images and audio signals which are output simultaneously from the
camerarecorder while data is being transferred from a computer to the camera-recorder.
The model name will appear on the computer screen.
When connecting to a device having 4-pin type 1394 connector, first connect the cable to the 6-pin type
1394 connector on the camera.

•

•
•
•
•
•
•
•
•
Ferrite core (length: 30 mm) Ferrite core (length: 30 mm)
Ferrite core (length: 35 mm) Ferrite core (length: 35 mm)