beautypg.com

Checking photos taken (rec check), P2 card access lamps, Protecting against a possible erasure – Philips SD AG-HPX171E User Manual

Page 26: Formatting p2 cards, E-6 basic shooting operations (continued)

background image

E-6

Basic shooting operations (continued)

Checking photos taken (REC CHECK)

In the shooting pause mode, press the REC
CHECK button.
This plays back about 2 seconds of the video and
audio of the most recently recorded clip before
returning to pause mode.

Note that this REC CHECK portion will also be
recorded to any equipment you have set up to
make backup recordings.
The REC CHECK function does not work in PC
and MCR mode.

The HD recording(1080i/50i (720P/60P))
settings are already made in the default mode.
(To view the current settings, see Page 42.)

P card access lamps

CAM mode (MCR)
Lights green:

Data can be saved onto the cards or loaded
from them.

Blinks green (slow):

No available space on card, card is write-
protected

Lights orange:

Slot that is the object of recording

Blinks orange:

Data is now being accessed.

Blinks orange (fast):

A card is now being recognized.

Both lamps blink orange:

Ejection of card during access

Off:

Cards have not been inserted or formatted.
Insertion of incompatible card.

PC mode (USB DEVICE)
Blinks orange:
Data is now being accessed.
Off: A status other than access underway.

PC mode (139 DEVICE)
Blinks orange:
Connected
Off: Not connected

PC mode (139 HOST)
Lights green:

Access standby.

Blinks orange:

Data is now being accessed.

Off:

Cards have not been inserted or formatted.
Insertion of incompatible card.

P card access lamp

Protecting against a possible erasure

Switch the write-protect switch of the P2 card to
[PROTECT].

Write-protect switch

Formatting P cards

1

Set the POWER switch to ON. (Page 19)

Press the mode button and set it to MCR

mode (the MCR lamp lights).

Thumbnails are displayed.