Last clip delete function – Philips SD AG-HPX171E User Manual
Page 46
E-6
Shooting techniques for different targets (continued)
LAST CLIP DELETE function
Assign LAST CLIP to any of the USER 1 – 3
buttons to enable a convenient way to delete the
last recorded clip.
Pressing the USER button to which LAST CLIP
was assigned displays a YES/NO confirmation
dialog on the screen.
Select YES, and the last recorded clip is deleted
and “LAST CLIP DELETE OK” is displayed.
Select NO to cancel clip deletion.
Clips cannot be deleted when a switch has been
made to the MCR or PC mode or the recording
format has been changed after completing a
recording. Then it will not be possible to delete
the clip by turning the power off and turning it
back on.
This button cannot be used to delete clips when
a P2 card (one of two inserted cards) has been
removed and reinserted after recording, nor can
it be used to delete clips on a write-protected P2
card.
In hot swap recording, the clip delete function is
not available unless all the P2 cards containing
data shot in one recording operation are inserted.
The YES/NO confirmation dialog does not appear
when the clip delete function is not available.
•
•
•
•
•