Philips SD AG-HPX171E - Manual (Page 33)

ENGLISH
Shooting
E-33
Native recording
1
Using the REC FORMAT function
(Page 105) on the RECORDING SETUP
screen, select 70P/5PN (70P/30PN) or
70P/PN as the recording format.
Select the appropriate scene file using the
SCENE FILE dial.
If necessary, before doing this, perform the
camera settings from the setting menu, and
register the scene file. (Page 54)
3
Using the OPERATION TYPE function
(Page 99) on the SCENE FILE screen, select
FILM CAM, and set the desired recording
frame rate using the FRAME RATE function
(Page 99).
Press the START/STOP button to start or
stop native recording in VFR mode.
No signals are output from the 1394 terminal
during recording or recording standby in the
native mode.
Sound is not recorded. However, sound will
be recorded when the same frame rate is
used for both recording and playback.
When a recorded clip lasting a long time
is to be played back and imported using
a nonlinear editing system that supports
Varicams, the UB MODE option on the
RECORDING SETUP screen must be set to
FRM.RATE.
If the effective frame information is to be
carried over when recording onto this
camerarecorder from a nonlinear editing
system that supports Varicams, the 1394 UB
REGEN option on the RECORDING SETUP
screen must be set to ON.
After editing, materials are output from
the nonlinear editing system in 1080i/25P
(1080i/24P) or 720P/50P (25P over 50P)
(720P/60P (24P over 60P)) format. •
•
•
•
•
Standard recording
1
Using the REC FORMAT function
(Page 105) on the RECORDING SETUP
screen, select 70P/50P (70P/60P),
70P/5P (70P/30P) or 70P/P as the
recording format.
Select the appropriate scene file using the
SCENE FILE dial.
If necessary, before doing this, perform the
camera settings from the setting menu, and
register the scene file. (Page 54)
3
Using the OPERATION TYPE function
(Page 99) on the SCENE FILE screen, select
FILM CAM, and set the desired recording
frame rate using the FRAME RATE function
(Page 99).
When 720P/25P (720P/30P) or 720P/24P has
been selected as the recording format, the
following displays appear depending on the
setting which has been selected for the FRAME
RATE item on the SCENE FILE screen.
1) PULL DOWN information displayed in
PROPERTY-CLIP PROPERTY-VIDEO
With the default setting: 2:2 or 2:3
With any other settings: other
2) Format information in the bottom left of the
screen when thumbnails are displayed
With the default setting:
720P/25P (720P/30P) or 720P/24P
With any other settings:
720P/50P (720P/60P)
(The “default” setting is 25FRAME if the
frame rate of the recording format is 25P or
30FRAME if it is 30P (24FRAME if it is 24P)).
Press the START/STOP button to start or
stop standard recording in VFR mode.
Sound is recorded.
In the case of a nonlinear editing system that
supports Varicams equipped with an effective
frame extraction function, you can upload even
undercrank or overcrank shooting materials as
is. (The UB MODE option on the RECORDING
SETUP screen must be set to FRM.RATE.)
After editing, materials are output from the
nonlinear editing system in 1080i/25P (24P)
or 720P/50P (25P over 50P) (720P/60P (24P
over 60P)) format.
The 25P (30P) format is used for 2:2 pull-
down recording; the 24P format is used for
2:3 pull-down recording. •
•
•
•