Client cannot reach ipc – Paradyne 8310 MVLt User Manual
Page 90

Diagnostics and Troubleshooting
6-12
8000-A2-GB26-10
January 1999
Client Cannot Reach IPC
This section examines the DSLAM-to-IPC segment of the network.
NOTE:
On the IPC, verify that there is a MAC address for the client (enter the
macinfo command). If the correct MAC address appears on the IPC, and all
the items in the previous sections have been examined, it is safe to assume
that this segment of the network is functioning properly. Skip this section and
go to
on page 6-14. If a MAC address does not
appear, check the items in
99-16174-01
O OII
Next Hop
Router
(NHR)
DSLAM
Clients
NMS
WAN
Hub
SN
SN
ISP
IPC
WAN
DSLAM-to-IPC
Segment
NMS
ISP
Gateway
Router
This manual is related to the following products: