Configuring ip filter rules – Paradyne 8310 MVLt User Manual
Page 37

Configuring the Hotwire DSLAM
3-7
8000-A2-GB26-10
January 1999
Configuring IP Filter Rules
"
Procedure
Configure IP Filters and associated rules in the following sequence:
1. Define each filter. An IP filter consists of a set of rules.
2. Configure rules for each filter. TCP/UDP/ICMP traffic types can be selectively
forwarded or discarded based on the conditions specified in the rule.
3. Bind the filter to the interface using the General Interfaces screen (A-C-A).
This is an example of data contained in the IP Filter Table.
— An inbound filter acts on packets in the upstream direction from the client
to the NSP server.
— An outbound filter acts on packets in the downstream direction from the
NSP server to the client.
This manual is related to the following products: