Paradyne 8310 MVLt User Manual
Page 42

8310 MVL and 8510 RADSL Card Configuration
4-4
8000-A2-GB26-10
January 1999
Table 4-1.
Card Status Options (3 of 3)
Download Code (Download Code and Apply Download)
A-A-F (A and B)
Download Code (A) or Apply Download (B)
Download Code (A)
This screen is similar to the NVRAM Configuration Loader screen (A-A-D).
Image File Name – The file name may be a regular path name expression of directory
names separated by a forward slash (/) ending with the file name. The total path name
length must be less than 40 characters. If the TFTP server is hosted by a DOS
machine, then directory and file names must follow the 8.3 naming convention imposed
by DOS.
TFTP Server IP Address – Address in
nnn.nnn.nnn.nnn format. This address must be
in the management domain.
Start Transfer – Yes/No (Default = No).
Packets Sent – Number of packets sent in download.
Packets Received – Number of packets received in download.
Bytes Sent – Number of bytes sent in download.
Bytes Received – Number of bytes received in download.
Transfer Status – Status of the download transfer.
Once the download is complete, press Ctrl-z to exit back to the Download Code
submenu and select Apply Download.
Apply Download (B)
This selection applies the downloaded code and drops all connections by performing a
device reset. This screen is used to overlay the previously downloaded image for the
card. If you select yes at the Reset System prompt, the system goes through a system
restart and interrupts service on the card. For further information on this feature, see
Appendix A,
If you have not previously downloaded code, then you will not be able to
access this selection.