Dsl monitoring physical layer screens – Paradyne 8310 MVLt User Manual
Page 60
Monitoring the Hotwire DSLAM
5-4
8000-A2-GB26-10
January 1999
DSL Monitoring Physical Layer Screens
Use the Physical Layer screens to display read-only system information about
physical ports.
"
Procedure
To view the active ports list, Ethernet statistics, and HDLC bus statistics:
1. Follow this menu selection sequence:
Monitoring
→
Physical Layer (B-B)
2. The Physical Layer menu appears. Select the submenu option as shown in
Table 5-2 and press Enter.
Table 5-2.
Physical Layer Options (1 of 6)
Active List (Active Ports List)
B-B-A
Displays a list of the current status of all the active ports (e1a = Ethernet;
s1c, s1d, s1e, and s1f = DSL cards).
Num – Number of the port.
Name – Name of the port.
Description – Type of port.
MAC Address – MAC address of the active port. (Internal dummy address used for
non-Ethernet ports.)
Status – In-use or disconnected.