Levels of access, Software functionality, Configuring the dsl cards – Paradyne 8310 MVLt User Manual
Page 16
Hotwire DSLAM System Description
1-6
8000-A2-GB26-10
January 1999
Levels of Access
There are two levels of diagnostic/administrative access in the Hotwire DSLAM
system:
H
Administrator
The Administrator has complete read/write access to the DSLAM system.
With Administrator permission, you can set specific parameters and variables
to configure cards, ports, interfaces, Virtual Network ID (VNID) bridging, and
endpoint selection.
H
Operator
The Operator has read-only access and can view configuration information
and monitor performance but has no configuration menu access or
modification permission.
Software Functionality
Depending upon your system access, you can:
H
Configure the system,
H
Monitor the system, and/or
H
Run applications and diagnostic tests to troubleshoot the network.
Configuring the DSL Cards
The Hotwire DSLAM software provides DSL configuration options to:
H
Configure the DSL cards
H
Configure the interfaces and ports
H
Set up user accounts
H
Upload or download a copy of a card’s configuration data to or from a Trivial
File Transfer Protocol (TFTP) server
H
Download a new version of the DSL and endpoint software
NOTE:
You must have Administrator permission to configure the system.
For more information about configuring the system, see Chapter 3,