Powerware 9395 UPS and Plus 1 UPS 650825 kVA - Manual (Page 174)

COMMUNICATION
EATON Powerware ® 9395 UPS (650–825 kVA) Installation and Operation Manual S 164201725 Rev 2 www.powerware.com 8−4
Remote Notification differs from the basic Terminal mode with the addition the
following functions:
S
Call Answer
The Call Answer function allows the user to call into the UPS from a remote
location and enter Terminal mode.
S
Call Out
The Call Out function allows the UPS to be configured to call either a remote
computer or numeric paging service over the phone line. Call Out allows the UPS
to call a remote computer and leave a one-line descriptive message of the alarm or
notice condition. Numeric paging support allows the UPS to call a paging service
and send numeric messages.
S
Housekeeping
The Housekeeping function maintains the link between the UPS and modem.
8.5 Terminal Mode
In Terminal mode, the user can request the following functions:
NOTE The brackets ([ ]) in the following bullets indicate standard keyboard characters. To use a key
combination, hold down the Escape key and press the indicated letter key.
S
[ESC] [A] displays the Active Alarms.
S
[ESC] [H] displays the Event History.
S
[ESC] [N] displays the Node Bits Setup.
S
[ESC] [Q] Quit.
8.5.1 Display UPS Control Panel
When this function is invoked, a facsimile of the UPS control panel is displayed on the
terminal screen. All controls are functional and can control the UPS remotely. The only
exception is the Load Off control which requires the operator to press and hold the
local control for two seconds to shut down the UPS.
To remotely control the UPS or view UPS information, use the Escape key legend to
control the function normally controlled by the control panel softkeys. See
paragraph 7.2 on page 7−2, Using the Control Panel," for instructions on navigating
the control panel.