Powerware 9395 UPS and Plus 1 UPS 650825 kVA - Manual (Page 147)

UPS OPERATING INSTRUCTIONS
EATON Powerware ® 9395 UPS (650–825 kVA) Installation and Operation Manual S 164201725 Rev 2 www.powerware.com 7−5
7.2.4 Using the Menu
The UPS menu bar allows you to display data in the information area to help you
monitor and control UPS operation. Table 7-2 shows the basic menu structure.
Table 7-2. Display Function Menu Map
Menu Option Description
EVENTS Displays the list of Active System Events and a historical log of system events.
METERS Displays performance meters for the system or critical load.
CONTROLS Displays the System Status screen.
SETUP Allows you to set the display contrast, set the date and time for the time stamp,
configure the UPS serial communication ports, and view the firmware version numbers.
LOAD OFF De−energizes the critical load and powers down the UPS.
ESC Returns to Main Menu and Mimic screen from the Events, Meters, Controls, or Setup
screens. Returns to the main System Setup Level screen from a setup submenu.
Return arrow acknowledges or executes a command, or saves a setting.
Up and down arrows scroll through screens and lists or highlight settings.
Left and right arrows select or adjust settings displayed on the screen.
7.2.5 Mimic Screen
Figure 7-4 shows the Main Menu and Mimic screen. To select the Mimic screen from
the Events, Meters, Controls, or Setup screens, press the
ESC pushbutton on the
current menu bar.
The Mimic screen shows the internal components of the UPS cabinet and a real-time
graphical representation of the operating status of the system.
TIME: 11 : 35 : 43 DATE: 06 / 25 / 2008
CONTROLS LOAD OFF METERS EVENTS SETUP
OUTPUT BATT
UPS INPUT
STSW
BYPASS
Figure 7-4. Main Menu and Mimic Screen (Normal Mode)