Polycom V2IU Converged Network Appliance 6400-S - Manual (Page 60)

User Guide V 2 IU 6400-S Converged Network Appliance
7 - 14
2. In the System menu, select Services Configuration.
3. Enter information as described in the following table.
Field Description
SNMPv1 Read-Only Community The community string that the management
station uses when accessing read-only
objects from the 6400-S. The default is
'public'.
SNMPv1 Trap Community Trap community string place in trap pdus.
SNMPv3 User Name If SNMPv3 is enabled, this field defines the
SNMPv3 user name for SNMPv3 USM
based authentication and VACm access
control.
SNMPv3 Passphrase The SNMPv3 passphrase is optionally used
to authenticate the user as well as encrypt
the payload based on the SNMPv3 Security
setting below. The minimum length of a valid
passphrase is 8.