Polycom V2IU Converged Network Appliance 6400-S - Manual (Page 26)

User Guide V 2 IU 6400-S Converged Network Appliance
4 - 2
To configure subscriber interface settings:
1. In the navigation bar, select Network.
\
2. In Subscriber Interface Settings, highlight and replace the default IP
Address and Subnet Mask.
3. If you are configuring network settings, see the instructions in
Configuring the Network on page 4-5 .
4. If you want to configure a management interface that is different than the
default, complete all of the configuration tasks, then see Configuring a
management interface on page 7-9 .
5. Press Submit.
Configuring provider interface settings
The provider interface defines the interface between the 6400-S and internal
voice, video and data devices. This interface is generally connected to the
private network.
Note After submitting the new configurations, you need to reconnect to the 6400-S using
the new IP address and subnet mask before you can continue with the
configuration.