Configuring the v2iu 6400-s, Connecting to the 6400-s, Configuring the v – Polycom V2IU Converged Network Appliance 6400-S User Manual
Page 17: Connecting to the 6400-s –1, Iu 6400-s
3 - 1
3
Configuring the V
2
IU 6400-S
Configure the 6400-S using a web browser such as Internet Explorer or
Netscape Navigator. The 6400-S is shipped with a pre-configured IP address
for its Subscriber (Port 1) interface.
This chapter gives you the information you need to get started. It covers:
•
•
Logging in and out of the 6400-S
•
Navigating through the configuration pages
•
Connecting to the 6400-S
You need to connect to the 6400-S before you can configure it to work with
your network. Connect using the supplied preset IP address and subnet mask.
You are also supplied with a default user ID and password.
To connect to the 6400-S:
1.
Connect a PC using an IP address of 192.168.1.2 and subnet mask of
255.255.255.0 to Port 1 of the 6400-S.
2.
Launch a web browser on the PC and enter the URL string: 192.168.1.1.