Configuring network settings, Configuring subscriber interface settings, Configuring network settings –1 – Polycom V2IU Converged Network Appliance 6400-S User Manual
Page 25: Configuring subscriber interface settings –1
4 - 1
4
Configuring Network Settings
You can configure the 6400-S for:
• Subscriber interface settings.
• Provider interface settings.
• Network settings.
Optionally, you can:
• Enabling remote system logging.
• Configure a different interface for managing the 6400-S. See
for
details.
• Configure additional administrative operations, such as changing
the password and setting the system date and time are available. See
for details about these, and other operations.
Configuring subscriber interface settings
The subscriber interface defines the interface between the 6400-S and your
customers’ endpoints or the public network.
Before
Starting
Collect the following information:
•
An IP address for the 6400-S.
•
An IP address for the gateway.
•
The preferred and secondary IP address for the DNS server.
The 6400-S is shipped with the preset subscriber (Port 1) IP address of:
192.168.1.1, and the default subnet mask: 255.255.255.0 so you can access and
configure the 6400-S.