Polycom V2IU Converged Network Appliance 6400-S - Manual (Page 29)

Configuring Network Settings
4 - 5
5. Press Submit.
Configuring the Network
Use network settings to configure the default gateway address, and the
primary and secondary DNS servers.
Packets destined for IP addresses not known to the 6400-S are forwarded to the
Default Gateway for handling. For the 6400-S the Default Gateway MUST be
the next hop router attached to Port 1 (the Subscriber interface).
The primary DNS server is used by the 6400-S to resolve domain names to IP
addresses. The secondary DNS server is used in the event the primary DNS
server is unreachable.
Setting Description
10baseT-HD 10Mbits per second using half duplex
transmission
10baseT-FD 10Mbits per second using full duplex
transmission
100baseT-HD 100Mbits per second using half duplex
transmission
100baseT-FD 100Mbits per second using full duplex
transmission
Autonegotiate The 6400-S autonegotiates link rate and
duplex with the directly attached device.