Basic settings rules, Configuring advanced firewall settings, Basic settings rules –3 – Polycom V2IU Converged Network Appliance 6400-S User Manual
Page 45: Configuring advanced firewall settings –3
Configuring the Firewall
6 - 3
Basic settings rules
Follow these rules when configuring basic settings:
• For Allow TCP Port and Allow UDP Port, valid values are 1 through
65535.
• Separate multiple entries by spaces,
• Indicate a range of values with a colon (:). For example, 25:50 means
perform the action on ports 25 through 50
Configuring advanced firewall settings
A comprehensive security policy can be created using advanced settings.
To configure advanced settings:
1.
In the navigation pane, select Firewall and scroll to Advanced LAN and
WAN Firewall Settings.
2.
Enable to disable firewall logging. (See
Enabling or disabling the firewall
on page
.)
3.
Configure Deny Hosts (IP) according to the rules in
on page
. Deny Hosts (IP) denies all traffic with the source IP
address matching the specified hosts