Polycom C16 - Manual (Page 451)

Command Protocol Reference Guide
A - 109
Description
This parameter gets or sets the minimum value of the analog gpio pin. This
parameter along with analog_gpio_max control how the analog value of the pin
is mapped to an integer range.
digital_gpio_state Digital GPIO Pin Status
Description
This parameter gets or sets the value of the digital gpio pin. Writing an input
has no effect and returns the current value of the input.
digital_gpio_value Digital GPIO Array Value
System Limits Minimum: -2147483648, Maximum: 2147483647
Default 0
User Limits
Supported No
Argument Argument value
Argument Argument value
Channel Type Virtual Channel
Value Type Boolean
Read/Write Mode Read/Write
Phys Chans Digital General Purpose I/O Input, Digital General Purpose
I/O Output
Virt Chans Control
Default 0
Argument Argument value
Channel Type Virtual Channel
Value Type Integer
Read/Write Mode Read/Write
Phys Chans Digital General Purpose I/O Input, Digital General Purpose
I/O Output
Virt Chans Control Array