Description, Line_out_gain line output gain, Examples – Polycom C16 User Manual
Page 373
Command Protocol Reference Guide
A - 31
Description
This parameter sets the fader level (in dB) in the digital domain.
Examples
line_out_gain Line Output Gain
System Limits
Minimum: -100.0, Maximum: 20.0, Resolution: 0.1
Default
0.0
User Limits
Supported
Yes
Argument
Argument value
Command
Response
Description
set fader "Amplifier" 1
val fader "Amplifier" 1
Sets the fader on the "Amplifier" virtual channel to 1.
get fader "Amplifier"
val fader "Amplifier" 1
Returns the current value of the fader on the "Amplifier"
virtual channel.
set fader max "Amplifier"
10
val fader max "Amplifier"
10
Sets the maximum fader value to +10 on the "Amplifier"
virtual channel. Any commands to set the fader above
+10 will have the value set to 10.
set fader min "Amplifier"
-15
val fader min "Amplifier"
-15
Sets the minimum fader value to -15 on the "Amplifier"
virtual channel. Any commands to set the fader below -15
will have the value set to -15.
inc fader "Amplifier" 2
val fader "Amplifier" 3
Increments the current value of the fader by 2dB on the
"Amplifier" virtual channel and returns the current value
of the fader.
inc fader "Amplifier" 0.5
val fader "Amplifier" 3.5
Increments the current value of the fader by 0.5dB on the
"Amplifier" virtual channel and returns the current value
of the fader.
dec fader "Amplifier" 2.5
val fader "Amplifier" 1
Decrements the current value of the fader by 2.5dB on
the "Amplifier" virtual channel and returns the current
value of the fader.
Argument
Argument value
Channel Type
Virtual Channel
Value Type
Floating-Point
Read/Write Mode
Read/Write
Phys Chans
Conferencing Line Output, Sound Reinforcement Line
Output