Soundstructure parameters, Gain and mute parameters, Description – Polycom C16 User Manual
Page 372: Fader digital fader
Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
A - 30
set fader "Amplifier" 10
val fader "Amplifier" 10.0
set fader max "Amplifier" 10
val fader max "Amplifier" 10.0
set fader min "Amplifier" -20
val fader min "Amplifier" -20.0
get fader "Amplifier"
val fader "Amplifier" 10.0
set fader "Amplifier" -40
val fader "Amplifier" -20.0
In the last example because the fader min was set to -20, trying to set the fader
to -40 limited the value to -20 automatically.
SoundStructure Parameters
Gain and Mute Parameters
Description
The fader, gain, and mute parameters are described here. The telephony gains,
faders, and mutes are described in the Telephony Parameters section. The
matrix crosspoint gains and mutes are described in the Matrix Parameters
section.
fader Digital Fader
Argument
Argument value
Channel Type
Virtual Channel
Value Type
Floating-Point
Read/Write Mode
Read/Write
Phys Chans
Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans
Mono, Stereo