Pentax MZ-60 - Manual (Page 81)

79
B
ASIC OPERA
TION
(PREP
ARA
TION)
B
ASIC OPERA
TION
(SHOO
TING)
AD
V
ANCED OPERA
TIONS
O
THERS
SELECTING THE VARIOUS BUILT-IN FLASH MODES
✍
MEMO
• The auto-popup flash mode can only be set when one of 6 picture modes is
selected.
• The built-in flash pops up automatically when is displayed on the LCD
panel. But it discharges only when required. (Automatic flash function)
• or can only be set when one of 6 picture modes is selected.
• The auto-popup function of the built-in flash does not work when the AE lock
function is in use.
• The automatic flash function can also be used with the external flash.
• Even if
is displayed on the LCD panel, the built-in flash does not pop up
automatically when the external flash has been mounted either with the power off
or the external flash is not yet fully charged.
• If the red-eye reduction is used while the AF360 FGZ, etc. is set as a slave unit,
the pre-flash will trigger the slave unit to discharge. Do not use red-eye reduction
with slave unit.
Auto-popup Auto-popup
+
Red-eye reduction
Manual-popup
+
Red eye reduction
(See page xx)
Manual-popup
(See page xx)
Flash off
(See page xx)
At each depress of the flash
mode button, the flash mode
on the LCD panel changes as
shown in the chart