Pentax MZ-60 - Manual (Page 79)

77
B
ASIC OPERA
TION
(PREP
ARA
TION)
B
ASIC OPERA
TION
(SHOO
TING)
AD
V
ANCED OPERA
TIONS
O
THERS
SETTING THE FILM SPEED (ISO)
MANUALLY
This camera automatically reads the film speed from the film's
DX code. However, the film speed setting can be changed. If you
use a non-DX coded film, set the film speed manually.
How to set
1
1. Load the Non-DX corded
film.
Move the select dial until
appears on the LCD
panel while depressing the
exposure mode button.
2
Move the select dial to set
ISO film speed displayed on
the LCD panel.
After the ISO is set, move the
select dial until the your desired
exposure mode other than ISO.
✍
MEMO
• To change the ISO, turn the select dial to the left for a smaller number (Slower
film speed, or right for a larger number (Faster film speed).
• The shutter cannot be released when is displayed on LCD.
• is displayed when the film speed is set manually.