Philips DVDR7310H - Manual (Page 44)

English
44
Record to Hard Disk or recordable DVD
(continued)
F Press the Blue button on the remote
control for { AUTO REC }.
Record only new DV updates
Record entire DV tape
Cancel
Auto Record of DV input to hard disk
Note: The { AUTO REC } option can only be
activated while in camcorder play or pause
mode.
To copy the entire DV tape
Select { Record entire DV tape } in
the menu and press OK to confi rm.
The camcorder will rewind the tape
and start recording from the beginning.
To copy the newly recorded
contents from the DV tape
Select { Record only new DV updates }
in the menu and press OK to confi rm.
The recordings which are later than the
date and time set in the { DV Specials }
(see page 73) will be recorded onto the
HDD or recordable DVD.
G To use the recorder’s remote control to
control the camcorder operation during
recording, press the Green button on the
remote control for { DV CONTROL }.
The DV control buttons display on the
screen.
+RW
DV CONTROL
CAM 2
AUTOREC
H You can pause, play, stop, fast forward or
rewind the scene using the
keys on the recorder’s remote control to
select the respective control buttons on
the screen.
I To stop the recording, press STOP .
Both the recorder and camcorder will
stop.
J To exit, press TUNER.
Helpful Hints:
– Some camcorders cannot be controlled
using this recorder’s remote control.
– Mixing of PAL and NTSC video format
recording on a same recordable DVD is not
possible.
– If a part of the tape is blank, the recorder
will pause recording. Recording will restart
automatically when there is a recordable
signal. However, if there is more than 5 (fi ve)
minutes of blank tape, the recording will end
automatically.
– A chapter marker is inserted every time
when there is a break in the time code on
the DV tape. This happens when the
recording is stopped or paused then
restarted.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.