Polaroid PDC-2000 - Manual (Page 83)

14 When the picture is framed as desired, click the Snap button
(or hold down the
z key and press the S key) to capture the
picture and transfer it to your image processing application or
to a Preview window in PDC-2000 Direct.
Note: To snap the picture after a preset delay, click on the
timer button (next to the Snap button) instead of the Snap
button. Enter the desired time delay, then click Start Timer to
begin the specified interval.
15 If you are using an image processing application, close the
Take Pictures window (if it is still open) and follow
instructions with your application to view, edit or save the
picture.
If you are using PDC-2000 Direct, choose Save from the File
menu.
Changing operating preferences
Available options Using the PDC-2000 plug-in, you can set the following
preferences. These preferences remain unchanged until you set
them again.
User name The user name stored in the camera is attached to
each picture. After a picture is taken, you can view the user
name to help identify the photographer or the camera by
using the Get Info button in the Transfer Pictures window.
(See Viewing picture information on page 67.) Changing the
user name affects only pictures taken after the changes are
made. Pictures taken earlier and stored in the camera retain
the user name in effect when they were taken.
Using the PDC-2000 with your Macintosh 75