Polaroid PDC-2000 - Manual (Page 67)

2 Simultaneously press and hold the Power button and the Auto
Focus button until “restored” appears on the LCD panel
(about 2 seconds), then release the buttons.
3 Transfer the pictures you want to keep to your computer (see
page 69 for Macintosh or page 91 for PC).
Note: Restoring pictures is likely to change the picture
numbers. Use care in choosing the pictures to be transferred.
4 Erase all the pictures from the camera. (See Erasing all
pictures on page 57, or see Chapter 4 or 5 to use your
computer for erasing the pictures.)
Note: Because this procedure restores all pictures on the
camera’s storage disk, the LCD displays “disk full” if you
attempt to take additional pictures without performing steps
3 and 4.
Using the PDC-2000 camera 59