Polaroid PDC-2000 - Manual (Page 20)

WARNING: EACH SCSI DEVICE CONNECTED TO
YOUR COMPUTER MUST HAVE ITS OWN UNIQUE ID
NUMBER SO YOUR COMPUTER CAN DISTINGUISH IT
FROM OTHER ATTACHED SCSI DEVICES. USING TWO
OR MORE DEVICES WITH THE SAME ID NUMBER CAN
CAUSE THEM TO MALFUNCTION. YOU CAN LOSE
DATA AS A RESULT.
If the PDC-2000 is your only external SCSI device or no other
device in the chain is using ID 4, skip the rest of this section
and go on to Installing and charging the batteries on page 14.
If you must change the camera’s SCSI ID, use the following
steps:
1 Make sure the camera power is off and the camera is
disconnected from the computer. If the camera is on, turn it
off by pressing the power button (a).
12