Polaroid PDC-2000 - Manual (Page 48)

When a blinking red LED appears in the viewfinder, the LCD
panel also displays an explanatory error message. (See LCD
panel on page 37.)
Sound indicators The PDC-2000 provides audible tones to help alert you to the
following operating or error conditions:
Sound Meaning
One high-pitched tone when
camera power turned on Camera is ready to take
pictures
Two high-pitched tones
followed by a low-pitched
tone when Shutter button
pressed half way Low battery
Two high-pitched tones
when Shutter button pressed
half way Insufficient light, flash not
ready, storage disk full or
internal hardware error
One or two low-pitched
tones when camera turned
on Internal hardware error or
special condition
One or more low-pitched
tones followed by camera
powering off Battery power insufficient for
camera operation
When two high-pitched tones or a low-pitched tone indicate
an error condition, the LCD panel also displays an
explanatory message. (See LCD panel on page 37.)
If you wish, you can turn camera sound off for the error
condition signals. See Changing the preferences on page 77
(Macintosh) or page 99 (PC).
Capture and Index modes The PDC-2000 has two modes of operation: Capture and
Index. You select the mode by pressing the Index button.
The Capture mode is used for picture-taking. You can also
edit the default picture label while you are in the Capture
mode. (See Labeling pictures on page 50 for more
information.)
40