Planet Technology IDL-2402 - Manual (Page 346)

- 346 -
5.15 Alarm Profile Mode Commands
The commands in this section can be executed only in the Alarm Profile execution mode.
5.15.1 alarm mask
Description Mask the alarm
Syntax alarm mask
Parameter
Name Description
Name of alarm.
Valid values: Refer to Appendix B Alarm
Table.
Default value: -
Type: Mandatory
5.15.2 alarm unmask
Description Unmask the alarm
Syntax alarm unmask
Parameter
Name Description
Name of alarm.
Valid values: Refer to Appendix B Alarm
Table.
Default value: -
Type: Mandatory
5.15.3 alarm major
Description Set the level of the alarm to Major
Syntax alarm major
Parameter
Name Description
Name of alarm.
Valid values: Refer to Appendix B Alarm
Table.
Default value: -
Type: Mandatory