Planet Technology IDL-2402 - Manual (Page 334)

- 334 -
5.14 Priority List Mode Commands
The commands in this section can be executed only in the Priority List execution mode.
5.14.1 ds
Description Set Differentiated Service of packets to remark VLAN priority / Show
Differentiated Service priority list entry / Disable Differentiated
Service priority list entry
Syntax ds prio {xdsl / | gigabit } dscp
ds list
ds disable
Parameter
Name Description
Differentiated Service priority list number.
Valid values: 1~256
Default value: -
Type: Mandatory
Priority value
Valid values: 0~7
Default value: -
Type: Mandatory
Port number.
Valid values: 1~24(48) for xDSL, 1 for GBE
Default value: -
Type: Mandatory
PVC number
Valid values: 1 ~ 8
Default value: -
Type: Mandatory
Diffserv Code Points, which is a 6-bit number.
The standardized combinations are listed below:
default Default value (bits:000000)
af11 Assured Forwarding Class 1:Low Drop
(bits:001010)