Planet Technology IDL-2402 - Manual (Page 288)

5.5 Ethernet Interface Mode Commands
The commands in this section can be executed only in the Ethernet Interface execution
mode.
5.5.1 bridge
Description Enter bridge configuration mode / Set bridge port to default status
Syntax bridge [default]
Parameter None
5.5.2 gbe admin
Description Set Gigabit Ethernet administrative status (ON/OFF)
Syntax gbe admin {on | off}
Parameter None
5.5.3 gbe speed
Description Set Gigabit ethernet speed to auto-negotiate, 100Mbps half
duplexing, or 100Mbps full duplexing
Syntax gbe speed {auto | half_100mbps | full_100mbps }
Parameter None
- 288 -