Planet Technology IDL-2402 - Manual (Page 290)

- 290 -
5.7 ATM Bridge Mode Commands
The commands in this section can be executed only in the ATM Bridge execution mode.
5.7.1 accfrm
Description Set acceptable frame type (untagged only, tagged only, or all)
Syntax accfrm {all | tag | untag}
Parameter None
5.7.2 accounting disable
Description Disable accounting after authentication
Syntax accounting disable
Parameter None
5.7.3 accounting enable
Description Enable accounting after authentication
Syntax accounting disable
Parameter None
5.7.4 auth disable
Description Disable port authentication
Syntax auth disable
Parameter None
5.7.5 auth enable
Description Enable port authentication
Syntax auth enable
Parameter None