Panasonic WJ-NT104 - Manual (Page 65)

65
● Setup
In the SERIAL PORT SETUP window, set TYPE under RS-232C to "WJ-DR200". Set the same communication parameters
as for the WJ-DR200 AV Disk Recorder. (For further details refer to the operation manual of the WJ-DR200 AV Disk
Recorder.)
● Control Operation
On the Location bar, type the URL http://192.168.0.10/drindex.html to access the WJ-DR200 OPERATION VIEW window
for the AV Disk Recorder.
q ALARM REC STANDBY
To toggle between enabling and disabling alarm
recording on the WJ-DR200 AV Disk Recorder.
w INDEX
To search the disk for recorded frames. Clicking the
[INDEX] button opens the WJ-DR200 RECORD LIST
window. Click the [REFRESH] button in the window to
refresh the recording list displayed in the image win-
dow. Then click the recording number to play back the
selected frames. To exit from search mode, click the
[STOP] button.
This button also toggles between displaying recordings
as a list and as a group of thumbnails.
You can also use this window to search the disk by the
same operation as from the WJ-DR200.
Refer to the operation manual of the WJ-DR200 for
details.
q
w
e
r
tyu
i
o !4
!9
!0 !5 !1 !6 !2 !7 !3 !8